Industrial Grade Wet Sand Blast Kit 5000 PSI 17.0252

Currently enjoying our 30th year in business, Water Cannon continues to lead the pressure washer industry in innovation. Our newest wet sand blasting kit is designed to remove unwanted surface contamination such as rust, scale, loose paint, barnacles and debris. The sand and high pressure water work together using venturi siphon technology to more safely clean metals, concrete and other similar surfaces. This Wet Sand Blast Kit simply quick connects to the end of a commercial pressure washer wand. This draws sand automatically through a 26' reinforced lightweight feed hose by using an engineered self venting pickup tube. The venturi siphon technology eliminates the need for an air feed system or other heavy and bulky equipment. It is based on the principle by which you can draw a product through a vacuum due to the pressure and velocity of another product.

Water Cannon's Industrial Sand Blast Kit provides maximum cleaning power with dustless sandblasting capabilities. Similar to the Foam Cannons, these Sandblast kits use the venturi effect to draw sand through a hose where it is expelled at high speed against the cleaning surface with pressurized water. Sandblast kits are impressive cleaning devices as long as your orifice is correct and your draw hose stays dry.

This version of the sandblast kit comes with two threaded nozzles and a 1/4" Male plug for quick installation. Be sure to use the correct sized nozzle for your machine as this will greatly impact the performance of the Industrial Sandblast kit.

Included Items in Complete sandblast kit:

• Industrial sandblast kit w/ head, probe, and hose
• 1 - threaded 0° 4.0 nozzle
• 1 - threaded 0° 5.0 nozzle
• 1 - 1/4" plated steel Male plug to install at blast head inlet
• 1 - roll of teflon tape for installation

Specs Requirements:

• Requires 3-8 GPM Pressure Washer
• Requires 3,000-5,000 PSI Pressure Washer
• Nozzle must be 0° Threaded nozzle fitting the specs of your machine

Tips:

• Use the right sized nozzle!
• Make sure your blast media is dry
• Keep your draw line (hose) interior dry
• Orient the sand barb (hose) to the top of the blast head so the sand drops into the chamber with the help of gravity, this will also limit the amount of water that could run down the hose if it was at the bottom.
• Once you start cleaning limit the starting and stopping as this will create valleys of settled blast media in the draw hose and create an inconsistent flow of sand when you re-start.

Most dry media will work for specialty applications such as glass beads, walnut shells, baking soda, black beauty and a full array of synthetic or natural products in sizes from 16 to 60 grit. Wet sand blasting controls the sand waste by weighting down the media thus preventing it from becoming an environmental hazard as an airborne pollutant (Check local regulations and always wear protective gear).

Inlcudes 4.0 Nozzle

Nozzle Holder - 1/4 QC Inlet x 1/4 FPT Outlet - 16.0128	Thumb Screw 5/16" x 1" - 16.0120
Tungsten Carbide Nozzle - 16.0121

 

Download Manual

WATER CANNON SAND BLAST KIT INDUSTRIAL 8GPM, APPROVED TO 6,000PSI WITH 4.0 NOZZLE, 0 DEGREE

California Residents - Click here for Prop 65 WARNINGS

GTIN:	00810013920611
Manufacturer:	Water Cannon
SKU:	17.0252

All Pressure Washers ships via UPS or Motor Freight to the lower 48 states of the U.S. (excludes Hawaii and Alaska), with international shipping options available when you order by phone. Upon buying power washing equipment from All Pressure Washers, we will email you a receipt with tracking information so you can track your order.

We are currently offering FREE SHIPPING and handling on PREPAID orders over $99.00.* This free shipping rate applies to prepaid orders only, paid via credit card, fax checks, etc. For orders placed by phone or online that are under $99.00, a shipping charge of $15.30 will be applied.

Click HERE for information on international shipping and our shipping policies.